Vacuum valve working principle:

The United States of America Ou vacuum valve is suitable for the vacuum system to connect or cut off the pipeline medium flow. The valve is a straight through type manual ball valve, by a spherical sealing, which can not only be used in vacuum condition, can also be used in a low pressure state, and can be installed at any position. Applicable medium with acid, alkaline gas or liquid.

The main advantages of imported vacuum valve:

Standardized, modular design, easy to replace and repair;

Easy to clean design;

Manual ultra-high vacuum valve adopts the energy-saving design, small volume.

Vacuum valve performance:

Scope: 1× 10-6Pa ～ 1.2× 105Pa

1× 10-5Pa ～ 1.2× 105Pa ( fluorine rubber ring seal )

Open when the pressure difference:≤ 1.2× 105Pa of arbitrary direction

The valve body and the valve seat leakage rate:≤ 1.3 × 10-7Pa· L· S-1

Recommended for the first time before the repair cycle number:200000

Body: baking temperature≤ 150 ℃

Mounting position: any

Valve body, valve cover, valve stem: stainless steel

Seal: tetrafluoroethylene, nitrile rubber, fluorine rubber, PPL